Karnage Welder with Kold Tip Circuit:
The Karnage Welder is a self-contained, battery powered portable flux core wire feed welder. You can weld with .030 and .035 wire. You will typically get 15 to 20 min of trigger time and a 60 inch bead depending on wire speed.
Features:
- Internal battery for quick and easy set up, no removing batteries to weld!
- Standard mig style torch, get into those tight spaces with ease.
- Fully portable. Open the lid, flip the switch and start welding. No pulling batteries.
- Kold Tip circuit means no unintentional arcing and easy staging for the perfect repair.
- Circuit breakers to prevent internal damage.
- Comes charged and ready to weld with a 2 Lb. spool of .030 flux core wire.
Bonus: Includes an additional 2lb spool of .030 flux core wire!
Karnage Kables:
Karnage Kables are the perfect accessory to complete your Karnage Welder. If you have depleted your internal batteries, these will allow you to connect to a pair of series 12V external batteries to continue welding.
Karnage Kables are quality 4AWG cables which are ~16' in length, with an ~4' jumper cable. Every end is color coded to make them dummy proof.
Karnage Welder Quick start guide:
- Open the case
- Pull out the torch and ground
- Connect ground to work surface
- Flip switch to UP position (LED Volt meter will light up)
- Loosen the spool break (we tighten it down so the spool does not unwind when in transport)
- Set wire speed
- WELD!
Downloadable Owner's Manual
Basic Operating Instructions Video
Basic Charging Instructions Video
Internal battery specs Mighty Max ML22-12
