Karnage Welder with Kold Tip Circuit + NOCO Genius5+12V Male Cigarette Plug

Karnage Welder with Kold Tip Circuit:

The Karnage Welder is a self-contained, battery powered portable flux core wire feed welder. You can weld with .030 and .035 wire. You will typically get 15 to 20 min of trigger time and a 60 inch bead depending on wire speed. 

Features:

• Internal battery for quick and easy set up, no removing batteries to weld!
• Standard mig style torch, get into those tight spaces with ease.
• Fully portable.  Open the lid, flip the switch and start welding. No pulling batteries.
• Kold Tip circuit means no unintentional arcing and easy staging for the perfect repair.
• Circuit breakers to prevent internal damage.
• Comes charged and ready to weld with a 2 Lb. spool of .030 flux core wire.

Bonus: Includes an additional 2lb spool of .030 flux core wire! 

NOCO Genius5+12V Male Cigarette Plug:

5-Amp Battery Charger, Battery Maintainer, and Battery Desulfator

This is hands down the best 110V charger for your Karnage Welder!

Introducing the all-new GENIUS5, one of our most powerful, highest-performing, energy-efficient, and compact chargers yet. The GENIUS5 is a 6-volt and 12-volt battery charger, battery maintainer, and battery desulfator rated at 5-amps for lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, and maintenance-free, plus lithium-ion batteries.

• Meet the GENIUS5 - Similar to our G3500, just better. It's 34% smaller and delivers 65% more power. And it's simpler and easier to use than ever before.
• Do more with Genius - Designed for 6-volt and 12-volt lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, and maintenance-free, plus lithium-ion batteries.
• Enjoy precision charging - An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates.
• Charge dead batteries - Charges dead batteries as low as 1-volt. Or use the all-new Force Mode that allows you to take control and manually begin charging dead batteries down to zero volts.
• Simple to set up and use - Plug-in, connect to the battery, select a charge mode, and start charging your battery. A fully-automatic, worry-free battery charger for year-round use.
• Restore your battery - Detects sulfation and acid stratification and restores lost performance for stronger engine starts and extended battery life.
• Compatible with all types of vehicles - Charge and maintain cars, motorcycles, lawnmowers, ATVs, tractors, trucks, SUVs, boats, classic cars, hot rods, and more - you name it.
• This INCLUDES the GC003 12V cigarette lighter plug

User Guide

Datasheet

Karnage Welder Quick start guide:

1. Open the case
2. Pull out the torch and ground
3. Connect ground to work surface
4. Flip switch to UP position (LED Volt meter will light up)
5. Loosen the spool break (we tighten it down so the spool does not unwind when in transport)
6. Set wire speed
7. WELD!

Downloadable Owner's Manual

Basic Operating Instructions Video

Basic Charging Instructions Video

Internal battery specs Mighty Max ML22-12