Reid Stock Replacement Knuckle, HD Chevy 10-Bolt Flat Top, Right
- Only available as a right, passenger-side knuckle
- Identical to the regular Reid Chevy Dana 44 & 10-BOLT passenger-side knuckles, but without orange powdercoating
- Ideal for crossover steering applications where the OEM non-powdercoated driver's-side knuckle is retained
- Only available for the passenger side
- Chevy/Jeep spindle bolt pattern accepts "outers" from all open knuckle Chevy half-ton and 3/4-ton front ends
- Cast from high strength ductile iron
- Machined with a "bottom up" taper to match OEM Chevy 10-Bolt tie rod location
- Beefed up with extra material and ribbing
- Flat tops machined and drilled for high steer arms
- 4th bolt hole for high steer arms increases clamping force and sheer strength
- 3/8" thickness added to flat top of the knuckle for high steer tie rod to leaf spring clearance
- Cast-in DUAL steering stops eliminate bent stop bolts that can cause u-joint and axle failures
- Tapered tie rod holes accept factory tie rod ends
- Tie rod holes can be drilled to accept 3/4" heim ends
- Interchangeable with all factory and aftermarket Dana 44 and 10-Bolt components
- Fully machined and ready for installation
- Machined to clear CTM u-joints without removing the grease fittings
