5th Gen 4Runner Dash Mount
- Standard lead times
This mount is designed not to block the information screen/clock area found on 5th generation 4Runners.
It requires 4 holes to be drilled on the radio bezel (Not the dashboard).
One on either side and two on top (one on either side of the information screen)
Our mount is designed to allow various mounting solutions and accommodate AMPS standard attachments on the rear section of your trucks center console. Verify center console arm rest / lid will still fully open with the panel before installation.
Each kit includes the following
- CNC Laser Cut and Formed dash mount with Fine Black Textured Powder Coat Finish
- Hardware
- If selected, charging kit
- If selected, Charging kit and phone holding kit. Everything you need is included.
- Lifetime warranty against manufacture defects and workmanship
- California residents WARNING: Cancer and Reproductive Harm
Please note before purchasing
Installation requires drilling. Four holes will be drilled on the center console itself.
The buyer hereby assumes all risks associated with any such modification. ICS Fab will not accept responsibility for personal injury or property damage arising from the failure or incorrect installation of any parts manufactured or sold by ICS Fab.
Installation requires the removal of the A/C Controls and the Radio. It also requires four holes to be drilled on the radio bezel itself.
Tools needed
- Blue painters tape
- Straight pick
- Drill
- 9/64” drill bit
- 1/4” drill bit
- #2 Phillips head screw driver
- 9mm wrench
- Ratchet with extension and 10mm socket
- Pliers
- Small Side cutters/razor blade/dremel
- Straight trim tool
