Falcon SP2 3.3 Fast Adjust Piggyback Shock Kit (1.5-6" Lift) for Jeep JK Falcon

Falcon SP2 3.3 Fast Adjust Piggyback Shock Kit (1.5-6" Lift) for Jeep JK

Regular price$1,929.99
/
Shipping calculated at checkout.

Falcon SP2 3.3 Fast Adjust Piggyback Shocks offer a wide range of adjustability with their easy to use 3-Position Fast Adjust Knob. Settings include Soft, Custom, and Firm. The Custom setting incorporates an 8-Position Micro Adjust Dial for more precise tuning between Soft and Firm. “High-Value Performance” is the driving force behind our vehicle-specific dampers for Jeeps, trucks, and SUVs. These Jeep-specific shock absorbers deliver increased stability, improved ride quality, and comfort for daily driven vehicles as well as race-inspired performance, handling, and stability for off-road rigs. Falcon Performance Shocks by TeraFlex.

Features:

  • SP2 3.3 Fast Adjust Piggyback Shocks offer a wide range of adjustability for specific terrain and/or handling characteristics
  • 3-Position Fast Adjust Knob for large damping adjustments
  • Settings: Soft, Custom, Firm
  • Custom setting includes an 8-Position Micro Adjust Dial for finer damping adjustments
  • Ideal for daily driven Jeeps as well as the serious enthusiast wanting to adjust damping for all driving conditions

JK:

  • JK corner-specific shock absorber w/ race-inspired performance
  • Front upper offset stud design provides maximum shock body to frame clearance during articulation
  • Outboard mounting increases clearance for lifted vehicles w/ raised track bar brackets
  • Rear shock body (all) and reservoir (piggyback) positioned on bottom eliminates shaft damage from rocks kicked up by the tires
  • Rear Shock Skid Plates available separately Piggyback:
  • Piggyback design increases oil and gas capacity for reduced heat
  • Moving gas charge to piggyback reservoir allows maximum amount of travel
  • Flows 6x more oil than restrictive reservoir hose designs
  • Eliminates common leakage issues found in banjo and swivel fittings
  • Front shock’s unique horizontal piggyback reservoir increases tire clearance

SP2 Mode Adjust:

  • Choose between Soft and Performance modes during install
  • Tunes both compression and rebound
  • Soft mode allows a partial bypass of the main piston for a softer ride
  • During aggressive driving, Soft mode retains performance tuning for optimal handling
  • Soft mode recommended for rough terrain/surfaces and cold weather
  • Performance mode recommended for max on- and off-road handling, stability, and control

Falcon Jeep Shocks (all):

  • Vehicle-specific shock absorbers
  • Race-inspired performance for increased vehicle stability
  • Improved dynamic roll control and low-speed damping
  • Dramatic improvement in on-road comfort and off-road performance
  • Optimized fitment for unobstructed suspension travel and articulation
  • 2.3” shock body provides optimal performance (Series 2 and Series 3 Shocks)
  • 2.125” shock body for high value performance (1.1 Monotube Shocks
  • 6061-T6 aluminum alloy shock body resists Impact to protect internal components
  • Smooth honed internal shock body surface for long-term performance
  • 3/4” (Series 2 and Series 3 Shocks) or 1/2” (1.1 Monotube Shock) induction hardened chrome plated shaft resists rock damage, corrosion, and shaft buckling
  • Large shaft diameter provides a wide range of adjustment on adjustable shocks
  • 1-piece energized Teflon bronze piston wear band
  • VOD (Volume Optimized Damping) features a digressive linear piston for quicker ramp-up and increased damping volume
  • VOD reduces shock bottoming at full compression or over uneven terrain
  • OGS (Oil/Gas Separator) prevents cavitation
  • Red Line oil for consistent performance across all temperatures
  • Synthetic formula also contains special anti-wear and lubricity agents
  • 1,000-hour salt spray corrosion resistance test on all hardware
  • Serviceable and rebuildable (factory serviced)
  • Designed, engineered, CNC machined, and assembled in-house from domestic and globally sourced components
  • Patented design
  • 3-year warranty

Notes:

  • Upgradeable to 3.5 aDAPT or 3.5 e-Adjust via Cartridge Upgrade Kits for quick compression adjustments. Sold separately
  • Bump stop configuration varies depending on shock absorber collapsed length, tire size, and fenders – See instructions for proper configuration for your application.

Installation Instructions:

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Recently viewed