Hard alloy tool steel slotted wear plate for ball/stud to socket wear protection
Wear plate features grease channels for increased flow through entire joint ensuring longevity & predictable operation
Magnesium Phosphate coating to inhibit corrosion & friction throughout
Heat treated 4140 chromoly ball/stud
Huge 30mm (1.18”) ball
Factory style serrated flanged castle nut
Ball joint pre-load adjustability provides the end user w/ near effortless wear adjustment (kit includes Preload Adjustment Tool)
Low-profile single lip dust seal eliminates torn conventional dust boot concerns
Adjustable ball stud retaining ring for accurate initial & future preload adjustments that can be done w/out any axle disassembly
Adjustable preload can be performed w/ simple hand tools
Adjustable end cap w/ two zerk fittings allow greasing access from either side w/out axle shaft removal even w/ larger RCV shafts
Dual helical grease grooves machined in the retaining ring allow spent grease to exit through the low-profile seal
Low-profile seal prevents contaminants, while allowing spent grease to evacuate from the ball joint
Teraflex recommend Ball Joints w/out Knurls as they will not score the inner knuckle & open up the bore.
Teraflex also offer Ball Joint w/ Knurls for ball joints that have a loose press fit in the inner knuckle due to repeated ball joint replacement or if knurled ball joints have been installed in the past.
Pair = 1 Upper, 1 Lower; Set of 4 = 2 Upper, 2 Lower